John Deere Radial Piston Pumps (3000 Series) — John Deere Radial Piston Pumps (3000 Series) User Manual

AW1;R39509 R70;070300 974 020288 AW1;R39597 R70;070300 986 010288 AW1;R39510 R70;070300 979 020288 CTM-7 (5-89) 2R3; 015 23 110589 3000 Series (HPR)-Hydraulic Pump Litho in U.S.A. 15-23 1. Wipe discharge valve seats (A) with your finger accessing seat through the discharge valve bores. This should be done before inspection since oil on valve seat may give impres- sion of seat damage. 2. Visually inspect discharge valve seats (A) for peening or damage. IMPORTANT: Press fit is critical for sealing, DO NOT remove discharge valve seats unless re- placement is absolutely necessary. 3.

Install special screw into seat through piston bore and JDG539 Installer and Removal Tool through discharge valve bore. 4. Install a slide hammer and adapter into the tool and remove seat. 5. Install new discharge valve seat (A) using JDG539 Installer and Removal Tool (8). Drive seat into housing until flange of tool is against face of housing. 1. Check inlet valves for free valve movement and valve lift. Valve should move until retainer contacts valve body. If valves are not broken and move freely, do not remove. INSPECT, REMOVE AND INSTALL DISCHARGE VALVE SEATS INSPECT, REMOVE AND INSTALL INLET VALVES AllTractorManuals.com