John Deere Radial Piston Pumps (3000 Series) — John Deere Radial Piston Pumps (3000 Series) User Manual

AW1 ;R39617 R70; 070300 1011 110589 AW1;R396l8 R70; 070300 1012 110589 CTM-7 (5-89) ZR1; 015 3D 110589 3000 Series (HPR)-Hydraulic Pump NOTE: Some pumps may be equipped with an optional manual destroke or optional electric destroke sole- noid in place of the destroke plug. 1. Remove destroke plug (A) or optional manual destroke or electric destroke solenoid. 2. Remove and inspect shuttle valve (8) and spring (C) for excessive wear or damage. Free Length . . ... . ...... . .. .... ... . . 45 mm (1 .8 in .) (approximate) Test Length .. ..... .. . . ........ ... ........ 26.5 mm at 175-218 N (1.0 in. at 40-49 Ib force) 3.

Install spring (C) and shuttle valve (8) depressing valve against spring to insure free travel. 4. Install destroke plug, manual destroke or electric de- stroke solenoid. (See Inspect and Install Destroke Plug, Manual Destroke or Electric Destroke Solenoid in this group.) 1. Discard O-rings (A and 8) and back-up ring (C) from destroke plug, manual destroke or electric destroke solenoid. 2. Inspect manual destroke or electric destroke for damage. Small hole(s) should be open. IMPORTANT: Torque specification for electric destroke solenoid is different than destroke plug or manual destroke. Over torquing elec- tric destroke solenoid may cause pump to malfunction. 3.

Install electric destroke solenoid, manual destroke or de stroke plug and tighten to specification. Manual Destroke Screw or Destroke Plug .... ..... .... ... . ........ .... . . .. 61 N'm (45 Ib-ft) Electric Destroke Solenoid ....... ... . . ..... .. ..... 34 N'm (25 Ib-ft) Litho in U.S.A. 15-30 DISASSEMBLE, INSPECT AND ASSEMBLE SHUTTLE VALVE- (NON-UNITIZED DESIGN) INSPECT AND INSTALL DESTROKE PLUG, MANUAL DESTROKE OR ELECTRIC DESTROKE SOLENOID NEW SPRING SPECIFICATION TORQUE SPECIFICATION AllTractorManuals.com