pressure limit. The load sense valve maintains the pump discharge pressure (J) above the load sense pressure (K) by an amount proportional to the load sense spring (H) preload. The crankcase relief valve (E) operates under two conditions. First, the valve moves against spring (F) when there is a sudden drop in demand for discharge oil flow. The pressure compensator valve dumps excess oil from the pump discharge into the crankcase. The crankcase relief valve in turn passes the oil back to the inlet. The second condition is when a directional valve is returned to neutral, allowing the load sense pressure (K) to drop.
The load sense valve shifts to (0) and decompresses the system into the crankcase. The relief valve quickly passes the oil into the inlet, allowing the pump discharge pressure to rapidly drop to the low standby pressure level. Litho in U.S.A. 115·11 CTM-7 (5-89) 2R3i 115 11 110589 R70;070300 963 050288 3000 Series (HPR)-Operation and Tests The load sense unitized designed control valve pro- vides a pressure compensator valve (0) and an additional load sense valve (G) each having the capability of decreasing or increasing the flow of the pump. Pump is in FULL STROKE when pressure compensator valve (0) and load sense valve (G) are in positions (N and P) shown above.
As demand for oil flow decreases, discharge pressure oil increases mov- ing both valves (0 and G) towards springs (8 and H). With both valves in position (0 and 0) discharge pressure oil is routed into the crankcase increasing the crankcase pressure and limiting the movement of the pump pistons. 80th the pressure compensator valve (0) and the load sense valve (G) are ported so they can decrease pump flow independently, but either valve can increase pump flow only if the other valve is in a position to permit the stroking function. This interaction allows the load sense valve to control the pump within the pressure compensator valve's AllTractorManuals.com