John Deere Radial Piston Pumps (3000 Series) — John Deere Radial Piston Pumps (3000 Series) User Manual

CTM-7 (5-89) 2R3; 010 12 110589 AW1;R39735,R39944 R70;070300 1063 260489 40 emS (2.4 in3) - 50 emS (3 in3) - 100 emS (6 in3) 65 emS (4 in3) - 130 emS (8 in3) 2000 Series (PR)-Hydraulic Pump 10-12 IMPORTANT: Pistons must be installed In their original bores if they are reused. Write numbers on piston plugs,. inlet valve plugs and pump housing for Identification. 1. Remove piston assemblies and put them in a parts tray to insure installation into the same bores from which they were removed. NOTE: Early design (TOP ASSEMBL Y IN UPPER PHOTO) for 40 cm 3 (2.4 in3) and 50 cm 3 (3 inS) pumps will require ALL new current design piston plugs if piston springs are replaced.

NOTE' Replacement of early design pistons (TOP ASSEM- BL Y IN LOWER PHOTO) for 65 emS (4 inS) and 130 emS (8 inS) requires a kit which includes current design (BOTTOM ASSEMBL Y IN LOWER PHOTO) pistons, double springs and piston plugs. 3. Inspect face and skirt of pistons (E) for metal transfer, galling or scoring. Replace housing(s) and all pistons or replace entire pump assembly if these conditions exist. IMPORTANT: All springs must be the same color code. 4. Inspect springs (0) for excessive wear or damage to coils. Replace ALL piston springs as a set if springs are questionable. A-Piston Plugs B-O-Rlngs C-Shlelds [)-pIston Springs E-Plstons 2. Inspect piston plugs (A) for thread damage.

REMOVE AND INSPECT PISTON ASSEMBLIES AllTractorManuals.com Litho in U.S.A.