AWl;R401b5,R39949 R70;070300 1130 080288 AWl;R3977b R70;070300 1118 100589 CTM-7 (5-89) 2R3i 010 37 110589 2000 Series (PRJ-Hydraulic Pump IMPORTANT: Make sure valve and sleeve are assem- bled correctly. Misassembly will cause pump malfunction. 10-37 9. Carefully install valve assembly into housing using Pres- sure Compensator Valve Installation and Removal Tool. Push until valve bottoms out in housing. 10. Install pressure compensator valve plug assembly. 11. Install spring guide (E), spring(s) (C and 0), sleeve assembly (8) and adjusting screw (A). Adjusting screw should be set to a minimum depth to prevent excessive deadhead pressure at start up.
A-Adjusting Screw B-Sleeve Assembly C-Outer Spring D-Inner Spring E-Sprlng Guide 1. Remove crankcase outlet valve plug (A) with shims (8), spring (C) and spring retainer (0). 2. Remove filter (F) from housing and clean or replace. Free Length ....................... 73.5 mm (2.9 in.) (approximate) Test Length ................................ 56 mm at 200-245 N (2.2 in. at 45--55 Ib force) 4. Remove plug (H) and crankcase outlet valve (G) from housing. E-Packlngs F-Fllter G-Crankcase Outlet Valve H-Plug 3. Inspect spring (C) for excessive wear or damage.
REMOVE, INSPECT AND INSTALL CRANKCASE OUTLET VALVE- NON-SERIALIZED PUMPS NEW SPRING SPECIFICATION A-Plug B-Shlms C-Sprlng D-Sprlng Retainer Litho in U.S.A. AllTractorManuals.com