John Deere Radial Piston Pumps (3000 Series) — John Deere Radial Piston Pumps (3000 Series) User Manual

CTM-7 (5-89) 2R3j 010 38 110589 AWl;R3771S R70;070300 Ill0 090288 AWl;R39769 R70;070300 ll24 181287 2000 Series (PR)-Hydraulic Pump Litho in U.S.A. 10-38 NOTE: Single bank pressure compensator housing is shown. IMPORTANT: DO NOT use a punch to remove pressure compensator valve sleeve (and crank- case outlet valve sleeve or fixed orifice sleeve in non-serialized pumps).Sleeve(s) could be damaged and cause sticking. 5. Carefully remove crankcase outlet valve sleeve (or fixed orifice sleeve) through other bore in pressure compensator housing. Remove in the same direction as pressure compen- sator valve sleeve. 6. Inspect crankcase outlet valve assembly.

Valve (A) must move freely in bore of sleeve (B). Replace valve and sleeve if drag or damage exists. Crankcase Outlet Valve 00 (upper) ................................ 11.882-11.892 mm (0.4678-0.4682 in.) 00 (lower) ................................. 11.095-11.105 mm (0.4368-0.4372 in.) Crankcase Outlet Valve Sleeve 10 (upper) ................................. 11.897-11.913 mm (0.4684-0.4690 in.) 10 (lower .................................. 11.110-11.126 mm (0.4374-0.4380 in.) NOTE' Cutaway section of non-serialized stroke control valve housing is shown. 8. Install new O-ring (A) in internal housing groove through crankcase outlet valve port (B). Use an O-ring seal hook to aid installation.

7. Install new O-ring on crankcase outlet valve sleeve. NEW PART SPECIFICATION AllTractorManuals.com