Cummins — 4021330

C8.3 Industrial Marine Gear Oil Cooler Section 6 - Maintenance Procedures at 300 Hours or 1 Year Page 6-9 Engine Coolant Heater Maintenance Check If your engine is equipped with an optional coolant heater, it should be checked periodically, especially when cold weather nears. When operating, the engine block heater will make an audible sound and the engine block will be warm to the touch in the water jacket areas. The coolant heater works on shore power. Marine Gear Oil Cooler Flush Shut off the sea water inlet valve on the vessel hull, if so equipped. Remove the marine gear oil cooler drain plug and drain the sea water from the gear oil cooler.

Disconnect the sea water inlet and outlet connections. Make sure the debris flushed from the cooler does not enter the water supply hoses. Use clean water to flush all the debris from the cooler.