Cummins — 4021330

Coolant Filter C8.3 Industrial Page 6-8 Section 6 - Maintenance Procedures at 300 Hours or 1 Year Install Do not allow oil to get into the filter. Oil will damage the DCA. CAUTION Mechanical overtightening can distort the threads or damage the filter head. CAUTION Apply a thin film of lubricating oil to the gasket sealing surface before installing the new coolant filter. Install the coolant filter on the filter head. Tighten the filter until the gasket contacts the filter head surface. Tighten the coolant filter an additional 1/2 to 3/4 of a turn, or as specified by the filter manufacturer. The valve must be in the ON position to prevent engine damage.

CAUTION Turn the shutoff to the ON position by rotating the knob from horizontal to vertical in the direction shown. Install the coolant system pressure cap. Operate the engine and check for coolant leaks. After the air has been purged from the system, check the coolant level again.