Cummins — 4021330

C8.3 Industrial Heat Exchanger Section 6 - Maintenance Procedures at 300 Hours or 1 Year Page 6-11 Antifreeze CAUTION Overconcentration of antifreeze or use of high-silicate antifreeze can damage the engine. Check the antifreeze concentration. Use a mixture of 50- percent water and 50-percent ethylene glycol or propylene glycol-based antifreeze to protect the engine to -32°C [-26°F] year-around. The Fleetguard® refractometer, Part Number C2800, provides a reliable, easy-to-read, and accurate measurement of freezing point protection and glycol (antifreeze) concentration. Antifreeze is essential in every climate.

Antifreeze broadens the operating temperature range by lowering the coolant freezing point and by raising its boiling point. The corrosion inhibitors also protect the cooling system components from corrosion and prolong component life. Heat Exchanger Flush Shut off the sea water valve on the vessel hull. To flush the marine gear oil cooler, refer to Procedure 008-041 (Marine Gear Oil Cooler) in Section 5.