Cummins — 4021330

C8.3 Industrial Air Compressor Discharge Lines Section 7 - Maintenance Procedures at 500 Hours or 6 Months Page 7-3 Supplemental Coolant Additive (SCA) and Antifreeze Concentration Maintenance Check Supplemental Coolant Additive (SCA) CAUTION Failing to maintain the required SCA concentration level can cause engine damage. Check the SCA concentration level At least twice a year At every subsequent oil drain interval if the concentration is above 3 units Whenever coolant is added to the cooling system between filter changes. Use Fleetguard® coolant test kit, Part No. CC2602, to check the SCA concentration level. Instructions are included with the test kit.

Use the Coolant Recommendations and Specifications in Maintenance Specifications (Section V) for the correct SCA and antifreeze level. Antifreeze CAUTION Overconcentration of antifreeze or use of high-silicate antifreeze can damage the engine. Check the antifreeze concentration. Use a mixture of 50- percent water and 50-percent ethylene glycol or propylene glycol-based antifreeze to protect the engine to -32°C [-26°F] year-around. The Fleetguard® refractometer, Part Number C2800, provides a reliable, easy-to-read, and accurate measurement of freezing point protection and glycol (antifreeze) concentration. Antifreeze is essential in every climate.

Antifreeze broadens the operating temperature range by lowering the coolant freezing point and by raising its boiling point. The corrosion inhibitors also protect the cooling system components from corrosion and prolong component life. Air Compressor Discharge Lines General Information All air compressors have a small amount of lubricating oil carryover that lubricates the piston rings and moving parts. When this lubricating oil is exposed to normal air compressor operating temperatures over time, the lubricating oil will form varnish or carbon deposits. If the following maintenance check are not performed, the air compressor piston rings will wear and not seal correctly.