Overhead Set C8.3 Industrial Page 8-2 Section 8 - Maintenance Procedures at 600 Hours or 2 Years Vibration Damper, Viscous Inspect The silicone fluid in the vibration damper will become solid after extended service and will make the damper inoperative. An inoperative vibration damper can cause major engine or drivetrain failures. CAUTION Check the vibration damper for evidence of fluid loss, dents, and wobble. Inspect the vibration damper thickness for any deformation or raising of the damper cover plate. If any of these conditions are identified, contact your local Cummins Authorized Repair Location to replace the vibration damper.
For vibration damper location, refer to Engine Diagrams in Engine Identification (Section E). Overhead Set Adjust Remove the air crossover tube from the engine if equipped. Disconnect the support clamps, hose clamp, and wastegate sensing line. Remove the crankcase vent tube and any other parts that would prevent removal of the valve cover.