Cummins — 4021330

Fuel Shutoff Valve C8.3 Industrial Page A-2 Section A - Adjustment, Repair, and Replacement Remove the hitch pin clip, the mounting capscrews, and the fuel shutoff solenoid. Install the new solenoid in reverse order of removal, and connect the wires. Torque Value: 10 N•m [ 89 in-lb ] Adjust the solenoid linkage as necessary so that the plunger is magnetically held in with the shutoff lever in the absolute full-run position. Turn the large hex nut on the end of the plunger to make adjustments, and secure in place with a locknut.