Cummins — 4021330

C8.3 Industrial Air in Fuel Section A - Adjustment, Repair, and Replacement Page A-5 A stuck-open injector can also blow combustion gas back into the pump and cause air to be present in the overflow. If the engine seems to be misfiring or running rough, break all the injector supply lines loose at the pump end. Crank the engine, and observe the lines. If combustion gas seems to be blowing back through the line, the injector is stuck open. Remove the injector. Take the vehicle to an Authorized Cummis Repair Facility/Dealer Location for testing. NOTE: Use two wrenches when loosening the lines at the fuel pump: One to hold the delivery valve and one to loosen the fuel line. Torque Value:

24 N•m [ 212 in-lb ] Disconnect the fuel line from the outlet of the fuel filter. Attach a preferably clear hose to the outlet of the fuel filter. (Do not use pressure test fitting.) Place a pressure gauge on the inlet side of the fuel filter and a vacuum gauge on the inlet side to the transfer pump. Insert a hose into an empty 3.8-liter [1-gal] container.