C8.3 Industrial Troubleshooting Symptoms Charts Section TS - Troubleshooting Symptoms Page TS-17 Coolant Temperature Below Normal Cause Correction STEP 1 Coolant temperature gauge or sensor is ............. Test the gauge and the sensor. Repair or replace, if necessary. Refer to the OEM service manual. malfunctioning OK Go To Next Step STEP 2 Engine is operating at low ambient temperature ............. Check the winterfront, shutters, and under-the- hood air. Use under-the-hood intake air in cold weather. Refer to Procedure 101-004 (Cold Weather Starting) in Section 1. OK Go To Next Step STEP 3 Fan drive or fan controls are malfunctioning ............. Check the fan drive and controls.
Refer to the OEM service manual. OK Go To Next Step STEP 4 Coolant temperature gauge is malfunctioning ............. Test the temperature gauge. Repair or replace the gauge, if necessary. OK Go To Next Step Check the thermostat for the correct part number and for correct operation. Contact a Cummins Authorized Repair Facility. STEP 5 Thermostat is not correct or is malfunctioning ............. OK Go To Next Step STEP 6 Contact a Cummins® Authorized Repair Facility