Cummins — 4021330

Troubleshooting Symptoms Charts C8.3 Industrial Page TS-18 Section TS - Troubleshooting Symptoms Engine Acceleration or Response Poor Cause Correction STEP 1 Operator technique is not correct ............. Refer to Procedure 101-015 (Operating the Engine) in Section 1. OK Go To Next Step STEP 2 Fuel level is low in the tank ............. Fill the supply tank. Refer to the OEM service manual. OK Go To Next Step Check the vehicle brakes for dragging, transmission malfunction, cooling fan operation cycle time, and engine-driven units. Refer to the OEM service manual. STEP 3 Vehicle parasitics are excessive .............

OK Go To Next Step STEP 4 Clutch is malfunctioning or is not correct ............. Compare the drivetrain specifications to Cummins recommendations. Check the clutch for correct operation. Refer to the OEM service manual. OK Go To Next Step Check for correct gearing and drivetrain components. Refer to the OEM vehicle specifications. STEP 5 Drivetrain is not correctly matched to the engine ............. OK Go To Next Step Check the fuel lines, fuel connections, and fuel filters for leaks. Check the fuel lines to the supply tanks. Refer to Procedure 006-024 (Fuel Supply Lines) in Section A. STEP 6 Fuel leak .............

OK Go To Next Step STEP 7 Intake manifold air temperature is above specification ............. Refer to the Intake Manifold Air Temperature Above Specification symptom tree. OK Go To Next Step STEP 8 Fuel supply line or passage restriction between the Check the fuel supply line or passage for sharp bends or restriction. Procedure 006-024 (Fuel Supply Lines) in Section A fuel pump and the injectors ............. OK Go To Next Step STEP 9 Charge air cooler is restricted or leaking ............. Inspect the charge air cooler for air restrictions or leaks. Refer to Procedure 010-027 (Charge-Air Cooler) in Section 5. OK Go To Next Step