Cummins — 4021330

C8.3 Industrial Troubleshooting Symptoms Charts Section TS - Troubleshooting Symptoms Page TS-31 Engine Runs Rough or Misfires Cause Correction Allow the engine to warm to operating temperature. If the engine will not reach operating temperature, refer to the Coolant Temperature Below Normal symptom tree. STEP 1 Engine is cold ............. OK Go To Next Step Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe and fuel filters as necessary. Vent air from the system. Refer to Procedure 006-003 (Air in Fuel) in Section A. STEP 2 Air in the fuel system .............

OK Go To Next Step STEP 3 Fuel supply line or passage restriction between the ............. Check the fuel supply line or passage for sharp bends or restriction. the OEM service manual fuel pump and the injectors OK Go To Next Step STEP 4 Fuel grade is not correct for the application or the Operate the engine from a tank of high-quality fuel. Refer to Procedure 018-002 (Fuel Recommendations and Specifications) in Section V. fuel quality is poor ............. OK Go To Next Step STEP 5 Fuel leak ............. Check the fuel lines, fuel connections, and fuel filters for leaks. Refer to the OEM service manual. OK Go To Next Step STEP 6 Fuel pump overflow valve is malfunctioning .............

Check the overflow valve. Replace if necessary. Refer to the OEM service manual. OK Go To Next Step Check the fuel lift pump for correct operation. Check the pump output pressure. Replace the fuel lift pump if necessary. Refer to An Authorized Cummins Repair Location. STEP 7 Fuel lift pump is malfunctioning ............. OK Go To Next Step STEP 8 Engine mounts are worn, damaged, or not correct ............. Check the engine mounts. Refer to Procedure 016-010 (Engine Mounts) in Section A. OK Go To Next Step STEP 9 Contact a Cummins® Authorized Repair Facility