Cummins — 4021330

Troubleshooting Symptoms Charts C8.3 Industrial Page TS-34 Section TS - Troubleshooting Symptoms Engine Speed Surges Under Load or in Operating Range Cause Correction STEP 1 Fuel level is low in the tank ............. Fill the supply tank. Refer to the OEM service manual. OK Go To Next Step Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe and fuel filters as necessary. Vent air from the system. Refer to Procedure 006-003 (Air in Fuel) in Section A. STEP 2 Air in the fuel system ............. OK Go To Next Step STEP 3 Idling with excessive load ............. Use the PTO feature for loaded conditions at low engine speeds.

Refer to the OEM service manual. OK Go To Next Step Check the vehicle brakes for dragging, transmission malfunction, cooling fan operation cycle time, and engine-driven units. Refer to the OEM service manual. STEP 4 Vehicle parasitics are excessive ............. OK Go To Next Step STEP 5 Clutch is malfunctioning or is not correct ............. Compare the drivetrain specifications to Cummins recommendations. Check the clutch for correct operation. Refer to the OEM service manual. OK Go To Next Step Operate the engine from a tank of high-quality fuel. Refer to Procedure 018-002 (Fuel Recommendations and Specifications) in Section V.

STEP 6 Fuel grade is not correct for the application or the ............. fuel quality is poor OK Go To Next Step STEP 7 Contact a Cummins® Authorized Repair Facility