Cummins — 4021330

Troubleshooting Symptoms Charts C8.3 Industrial Page TS-36 Section TS - Troubleshooting Symptoms Engine Vibration Excessive Cause Correction STEP 1 Engine not running smoothly ............. Refer to the Engine Runs Rough or Misfires symptom tree. OK Go To Next Step Check the fan hub, alternator, refrigerant compressor, and hydraulic pump for interference. Isolate belt-driven accessories and check for vibration. Refer to the OEM service manual. STEP 2 Belt-driven accessories are malfunctioning ............. OK Go To Next Step STEP 3 Air compressor pumping time is excessive ............. Refer to the Air Compressor Cycles Frequently symptom tree.

OK Go To Next Step STEP 4 Engine mounts are worn, damaged, or not correct ............. Check the engine mounts. Refer to Procedure 016-010 (Engine Mounts) in Section A. OK Go To Next Step STEP 5 Fan is loose, damaged, or has excessive hub ............. Check the fan. Refer to Procedure 008-040 (Cooling Fan) in Section 3. bearing end play OK Go To Next Step STEP 6 Engine is misfiring ............. Refer to the Engine Runs Rough or Misfires symptom tree. OK Go To Next Step STEP 7 Vibration damper is damaged ............. Inspect the vibration damper. Refer to Procedures 001-051 (Vibration Damper, Rubber) or 001-052 (Vibration Damper, Viscous) in Section 10.

OK Go To Next Step STEP 8 Alternator bearing worn or damaged ............. Clean and replace the alternator. Refer to the OEM service manual. OK Go To Next Step STEP 9 Contact a Cummins® Authorized Repair Facility