Cummins — 4021330

Troubleshooting Symptoms Charts C8.3 Industrial Page TS-56 Section TS - Troubleshooting Symptoms Lubricating Oil Loss Cause Correction Inspect the engine for external oil leaks. Tighten the capscrews, pipe plugs, and fittings. Replace gaskets, if necessary. Refer to the OEM service manual. STEP 1 Lubricating oil leak (external) ............. OK Go To Next Step Check the oil level. Verify the dipstick calibration and the oil pan capacity. Fill the system to the specified level. Refer to Procedure 007-043 (Lubricating Oil Level) in Section 3. STEP 2 Lubricating oil level is below specification .............

OK Go To Next Step STEP 3 Lubricating oil does not meet specifications for ............. Change the oil and filters. Refer to Procedures 007-002 (Lubricating Oil and Filters) in Section 5 and 018-003 (Lubricating Recommendations and Specifications) in Section V. operating conditions OK Go To Next Step STEP 4 Lubricating oil cooler is leaking ............. Check the lubricating oil cooler for coolant leaks and cracks. Refer to the OEM service manual or an Authorized Cummins Repair Facility. OK Go To Next Step STEP 5 Air compressor is pumping lubricating oil into the ............. Check the air lines for carbon buildup and lubricating oil.

Refer to the OEM service manual or an Authorized Cummins Repair Facility. air system OK Go To Next Step Check for excessive blowby. Refer to the OEM service manual or an Authorized Cummins Repair Facility. STEP 6 Blowby excessive ............. OK Go To Next Step STEP 7 Turbocharger oil seal is leaking ............. Check the turbocharger for oil seals and for leaks. Refer to the OEM service manual or an Authorized Cummins Repair Facility. OK Go To Next Step STEP 8 Contact a Cummins® Authorized Repair Facility