Cummins — 4021330

C8.3 Industrial Lubricating Oil Recommendations and Specifications Section V - Maintenance Specifications Page V-11 The API service symbols are shown in the accompanying illustration. The upper half of the symbol displays the appropriate oil categories. The lower half can contain a description of oil energy conserving features. The center section identifies the SAE oil viscosity grade. As the engine oil becomes contaminated, essential oil additives are depleted. Lubricating oils protect the engine as long as these additives are functioning properly. Progressive contamination between oil and filter change intervals is normal.

The amount of contamination will vary depending on the operation of the engine, kilometers or [miles] on the oil, fuel consumed, and new oil added. Extending oil and filter change intervals beyond the recommendations will decrease engine life due to factors such as corrosion, deposits, and wear. Refer to the Oil Drain Interval Chart in this section to determine which oil drain interval to use for an application.