CMD Commercial Application Marine Propulsion(B/C/N14) C8.3 Industrial Page W-12 Section W - Warranty These Warranties are made to all Owners in the chain of distribution, and Coverage continues to all subsequent Owners until the end of the periods of Coverage. Cummins MerCruiser Diesel Responsibilities During the Base Engine Warranty CMD will pay for all parts and labor needed to repair the damage to the Product resulting from a Warrantable Failure when performed during normal business hours. All labor costs will be paid in accordance with CMD published Standard Repair Time guidelines.
When it is necessary for mechanics to make on-site Warranty repairs, CMD will pay up to six hours total travel expenses, including meals, mileage and lodging, for mechanics to travel to and from the repair dock. CMD will pay for the lubricating oil, antifreeze, filter elements and other maintenance items that are not reusable due to the Warrantable Failure. CMD will pay for reasonable labor costs for Engine removal and reinstallation when necessary to repair a Warrantable Failure.
During the Extended Major Components Warranty CMD will pay for the repair or, at its option, replacement of the defective Covered Part and any Covered Part damaged by a Warrantable Failure of the defective Covered Part. Owner Responsibilities During the Base Engine Warranty Owner is responsible for the cost of lubricating oil, antifreeze, filter elements and other maintenance items replaced during Warranty repairs, unless such items are not reusable due to the Warrantable Failure. During the Extended Major Components Warranty Owner is responsible for the cost of all labor needed to repair the Engines, including the labor cost for Engine removal and reinstallation.
When CMD elects to repair a part instead of replacing it, the Owner is not responsible for the labor needed to repair the part. Owner is responsible for the cost of all parts required for the repair except for the defective Covered Part and any Covered Part damaged by a Warrantable Failure of the defective Covered Part. Owner is responsible for the cost of lubricating oil, antifreeze, filter elements and other maintenance items replaced during repair of a Warrantable Failure. During the Base Engine and Extended Major Components Warranties Owner is responsible for the operation and maintenance of the Product as specified in the applicable CMD Operation and Maintenance Manual.
Owner is also responsible for providing proof that all recommended maintenance has been performed. Before the expiration of the applicable Warranty, Owner must notify a CMD distributor, authorized dealer or other repair location approved by CMD of any Warrantable Failure and make the Engine available for repair by such facility. In the event of any Product failure, Owner is responsible for the cost of towing the boat to the repair dock and for all associated docking and harbor charges. Owner is responsible for communication expenses, meals, lodging and similar costs incurred as a result of a Warrantable Failure.
Owner is responsible for maintaining the Engine hourmeter in good working order at all times and to ensure that the hourmeter accurately reflects the total hours of operation of the Product. Owner is responsible for the costs to investigate complaints, unless the problem is caused by a defect in CMD material or factory workmanship. Owner is responsible for non-Engine repairs, “downtime” expenses, cargo damage, fines, all applicable taxes, all business costs and other losses resulting from a Warrantable Failure. Limitations CMD is not responsible for failures or damage resulting from what CMD determines to be abuse or neglect, including, but not limited to:
operation without adequate coolants or lubricants; overfueling; overspeeding; lack of maintenance of cooling, lubricating or intake systems; improper storage, starting, warm-up, run-in or shutdown practices; unauthorized modifications to the Engine. CMD is also not responsible for failures caused by incorrect oil or fuel, or by water, dirt or other contaminants in the fuel or oil. CMD is not responsible for failure resulting from: 1 Use or application of the Product inconsistent with its rating designation set forth above. 2 Incorrect installation.
Before a claim for excessive oil consumption will be considered, Owner must submit adequate documentation to show that oil consumption exceeds CMD published standards.