Cummins — 4021330

Cooling System Hoses C8.3 Industrial Page 4-2 Section 4 - Maintenance Procedures at 75 Hours, or 3 Months Zinc Plug Erosion Limits mm in A 19.0 MIN 0.750 New 51.0 MAX 2.000 B 6.4 MIN 0.250 New 16.0 MAX 0.630 NOTE: If any zinc plug does not meet specification, replace it with a new zinc plug. Install Install and tighten the zinc plug(s). NOTE: Do not use Teflon™ tape or pipe sealant on the threads of the sacrificial zinc plugs. Use of any type of sealant will insulate the zinc anode and prevent a good ground. Torque Value: 1/4-inch Plug 12 N•m [ 106 in-lb ] Torque Value: 3/8-inch Plug 22 N•m [ 195 in-lb ] Torque Value:

1/2-inch Plug 30 N•m [ 22 ft-lb ] Open the sea water valve on the vessel hull. Operate the engine and check for leaks. Cooling System Hoses Maintenance Check Marine and Industrial Applications Inspect the cooling system hoses and hose connections for leaks or deterioration. Particles of deteriorated hose can be carried through the cooling system and restrict or clog small passages, especially the heat exchanger and lubricating oil cooler, and partially stop circulation. Replace as necessary.