MAN — MAN Series 50 Operator's Guide

SERIES 50 OPERATOR'S GUIDE The malfunction code recorded in the computer memory will remain until it is erased by a technician. The malfunction code can also be obtained by the operator. A Diagnostic Request switch is provided which, when pressed, will cause the CEL to flash a code number. It will, for example, flash twice. . . pause . . . flash once. . . pause. In other words, a code 21. Code 21 indicates the throttle position sensor input voltage is high. See Figure 8. Figure 7 Diagnostic Data Reader J 38500 Once the malfunction has been corrected, the DDEC system will return the engine to normal operation. NOTE:

A code 25 (two flashes followed by 5 flashes) indicates all systems are working satisfactorily. The DDR can distinguish between codes now active and those stored in the ECM memory (inactive). Figure 8 SEL/CEL Flashing Code Examples All information subject to change without notice. (Rev. 01/04) 29 DDC-SVC-MAN-0058 Copyright © 2004 DETROIT DIESEL CORPORATION