TRANSMISSION Ch 2 page 164 Assemble running disc 80x105x5.75 (1), axial bearing 80x105x4 (2) and axial washer 80x105x1 (3) and oil them. NOTE Install running disc (1) with the chamfer showing to the axial bearing (see arrow) Figure 497 Assemble and oil the needle cage 80x88x46 (1). Figure 498 Align the inner clutch discs and assemble the idler (1) until contact is obtained. By means of short left-hand/right-hand rotations mount the inner clutch discs onto the inner disc carrier. Figure 499 Engage snap ring SB 70 (1) into the recess. Assemble and oil axial washer 80x105x1 (2) and axial bearing 80x105x4 (3). Figure 500 SHOP MANUAL