mercedes-benz — 1511 5555 02

AGS (Code GE1), AGS clutch balancing 29.10.2003 The drag point of the clutch is defined as follows: When "Close clutch" is selected, transferl of the engine torque starts, and when "Open clutch" is selected, transfer of the engine torque ceases at this point. The drag point is at approximately 30 -50 % of the clutch operation. Automated clutch operation attempts rapid overcoming of the "free travel" to the drag point. Comfortable start-off, disengaging and maneuvering response should be guaranteed despite the "rapid" clutch operation.

TR AGS (Code GE1), AGS clutch balancing 100 Based on the clutch characteristics, the FR control unit detects the start or end position of the clutch drag point. The drag point has a short range in automated clutch operation. The AGS clutch balancing in the ATEGO corresponds to the clutch characteristics in the ACTROS models 930 - 934 with Telligent automatic transmission II. "Clutch balancing" in the ATEGO and "Clutch characteristics" in the ACTROS models 930 – 934 are inherently the same. Clutch operation mechanical path 0% Clutch operation Clutch drag range 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training Clutch characteristics 0% 100%