mercedes-benz — 1511 5555 02

The AGS clutch balancing resets the clutch characteristics in the FR control unit. The clutch balancing is triggered in the "Teach-in processes" menu option in the AGS control unit. The teaching-in procedure for the "clutch balancing" is menu-assisted. TR AGS (Code GE1), AGS clutch balancing 101 Confirm this menu option and follow the further instructions given by DAS. The stored clutch characteristics are then deleted from the FR control unit. After some 6-7 shift operations the new clutch characteristics are identified in the FR control unit and stored. These serve as the new basis for adjusting the clutch response.

The start-off and clutch response may seem rather awkward during the first 6-7 shift operations required for teaching in the new clutch characteristics. The clutch characteristics are continually teaching themselves in automatically while traveling. The "adjustment" of the clutch characteristics does, however, become more sluggish as the length of operating time increases. The clutch characteristics therefore need to be reset after the following work has been carried out:

10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training FR control unit replaced Engine or transmission removed or replaced Work performed on clutch and clutch operation Hydraulic central release bearing replaced "Minor/major teach-in process" carried out in the AGS Teaching in clutch characteristics Clutch balancing procedure