AGS (Code GE1), emergency operation characteristics 29.10.2003 If the system is being operated in the emergency operation characteristics mode, then only the gears R – N – 1 – 2 can be shifted when stationary depending on the type of damage. Depending on the type of damage, the clutch is opened when the vehicle is at a standstill but no longer closed. Caution: As such, the vehicle can no longer be maneuvered without assistance! TR AGS (Code GE1), emergency operation characteristics 103 If a fault is detected in the AGS system by the control unit, then the event is displayed on the driver information system (FIS). The AGS system then shifts into emergency operation characteristics mode.
If a pressure sensor in the control unit fails, then the pump will start up with every shifting operation. The pressure relief valve limits the pressure in the system to approx. 95 bar. Should a fault occur on the vehicle while traveling, do not stop the vehicle until you have found a suitable parking place / location! Observe the traffic situation! If the vehicle has to be towed away it is absolutely essential to detach the propeller shaft! (See operator's manual!) 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training Note: Note: