Task No. Component Task AGS only Systems 5 AGS control unit FR 1 Hydraulic central release bearing FR 9 Countershaft speed sensor FR 6 Clutch travel sensor AGS control unit. FR TR AGS (Code GE1), location of the AGS components on the transmission and their task; exercise 82 7 Gear sensor X 4 Pressure reservoir X 10 Transmission output speed sensor the AGS control unit. X 2 Hydraulic transmission positioner the AGS control unit. X 7 Gate sensor X 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training No. Component Task AGS only Systems 5 AGS control unit ... is the central control electronics system for performing transmission-related functions.
FR 1 Hydraulic central release bearing ... operates the clutch pressure plate. FR 7 Gear sensor ... generates a variable electric signal, depending on the rotary movement of the shift shaft, and makes this available to the AGS control unit. X 4 Pressure reservoir ... reserves the pressure generated by the hydraulic pump, makes this available to the AGS system and absorbs pressure fluctuations. X 10 Transmission output speed sensor ... inductively records the speed of the transmission output shaft and makes it available to the AGS control unit. X 2 Hydraulic transmission positioner ...
is directly connected to the shift shaft and shifts the gears and the gate preselected by the AGS control unit. X 7 Gate sensor ... records the axial movement of the shift shaft, generates an electric signal from this and makes it available to the AGS control unit. X 9 Countershaft speed sensor ... inductively records the countershaft speed and makes the corresponding analog power signal available to the AGS control unit. FR 6 Clutch travel sensor ... records the clutch travel and makes a corresponding electrical signal available to the AGS control unit. FR