The High gate solenoid valves are energized for engaging the gate 3/4 to be shifted until such time as the gate position is set at a corresponding displacement displacement value which has been stored as a learned gear value. In addition, the pressure modulation solenoid valve (A92y5) must be co-actuated with every AGS (Code GE1), solenoid valves special features 29.10.2003 These solenoid valves have two positions: energized – open and not energized – closed (basic position), special feature: pressure modulation solenoid valve actuation of a gear solenoid valve (pulsed actuation). This serves to reduce pressure when engaging a gear.
This in turn facilitates the synchronization work in The clutch solenoid valves are only energized for opening until such time as a "Minimum clutch learned value" differential value of approx. 315 counts is reached. Two solenoid valves are installed for opening and two for closing. This is in the interests of safety. In "normal" clutch operation only one solenoid When shifting reverse gear, the countershaft is braked by asynchronization of the 2 nd gear (avoidance of shift sounds) before the reverse gear is shifted. TR AGS (Code GE1), solenoid valves special features 83 /83 valve is actuated alternately for opening and closing.
If the clutch needs to be opened or closed rapidly, then both solenoid valves may be actuated The even and odd gear solenoid valves are energized for engaging the gear to be shifted until such time as the gear position is set at a corresponding 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training Further information follows concerning the operation of the solenoid valves: (A92y4), energized-closed and not energized-open (basic position). The design of the solenoid valves is 25% ED (operating time). value that has been stored as a learned gate value. the transmission (supports, no premature wear). accordingly. 83 .