AGS (Code GE1), assignment and actuation of the solenoid valves; exercise 29.10.2003 P The control unit for automatic gear control (AGS) (A92a1) ensures that the clutch is opened and closed correctly and ensures actuation of the gear and gate solenoid valves. Only a few solenoid valves are used to move to the different transmission positions. Which solenoid valve is required for which transmission position? This question should be explained below. A total of 2 clutch positions, 4 gate positions and 3 gear positions must be moved to with the help of the solenoid valves.
TR AGS (Code GE1), assignment and actuation of the solenoid valves; exercise 83 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training A92a1 Control unit, automatic gear control (AGS) A92b1 Oil pressure/termperature combination sensor A92m1 Hydraulic pump A92y1 Solenoid valve, gate low A92y2 Solenoid valve, gate high A92y3 Solenoid valve, even gear A92y4 Solenoid valve, odd gear A92y5 Pressure modulation solenoid valve A92y6 Solenoid valve, open clutch 1 A92y7 Solenoid valve, open clutch 2 A92y8 Solenoid valve, close clutch 1 A92y9 Solenoid valve, close clutch 2 A92y10 Pressure relief valve 16 Fluid reservoir 18 Hydraulic pump A To gate cylinder hydraulic transmission positioner B To gear cylinder hydraulic transmission positioner C To hydraulic central release bearing D Electrical connection for vehicle electrics E Electrical connection for transmission electrics