Table a.
MI-04 Diagnostic Fault Codes (Flash Codes) G420E/G424E Tier LP Engine Advanced Diagnostics 52 DFC Probable Fault Action Corrective Action, First Check 34 MapSensorInputHigh TMAP sensor failure or shorted circuit Disable Throttle Check TMAP connector and MAP signal wiring for a shorted circuit TMAP PIN 4 to SECM PIN 5 (SIGNAL) TMAP PIN 1 to SECM PIN 1 (GND) TMAP PIN 3 to SECM PIN 18 (XDCR +5VDC) Check the MAP sensor by disconnecting the TMAP connector and measuring at the sensor TMAP PIN 1(GND) to PIN 4 (PRESSURE SIGNAL KPA) (2.4kΩ - 8.2kΩ) TMAP PIN 3(PWR) to PIN 4 (PRESSURE SIGNAL KPA) (3.4kΩ - 8.2kΩ) 37 IATSensorInputLow TMAP sensor failure or shorted circuit Stored Fault Code (MIL Only) Check TMAP connector and IAT signal wiring for a shorted circuit TMAP PIN 2 to SECM PIN 4 (SIGNAL) TMAP PIN 1 to SECM PIN 1 (GND) TMAP PIN 3 to SECM PIN 18 (XDCR +5VDC) To check the IAT sensor of the TMAP disconnect the TMAP connector and measure the IAT resistance *See the IAT table in Chapter 6.0