5. Snow and ice weather Due to the low friction coefficient on the icy road, the braking distance will be greatly extended during braking and will increase with the vehicle speed, so pay special attention to controlling the vehicle speed and keeping a large safety distance with the lead vehicle and side vehicle. condition of ensuring safety, adjust the driving style, apply more force to the brake pedal when braking, and drive at a low speed to the nearest BAIC Motor Dealership. which is usually caused by dust on the brake surface during slight brake), indicating that the brake pad needs to be replaced. contact BAIC Motor Dealership for inspection and maintenance.
Antilock brake system (ABS) Hydraulic brake system The ABS antilock brake system prevents the wheels from locking up during braking. This system helps the driver better control the direction of the vehicle and reduces the sideslip when the vehicle is braking on a slippery road. The hydraulic brake system transmits hydraulic pressure to the brake through double circuits. If one circuit fails, the other circuit will continue to work. In this case, you should drive to the nearest BAIC Motor Dealership at low speed for maintenance, if it is safe to do so. To brake in this case, it is necessary to exert more force on the pedal. Driving Guide 8. Overheating of brake ABS fault indicator lamp 6.
The brake disc is corroded When you don't need to brake, don't put your foot on the brake pedal, which will make the brake "slip". Otherwise, the brake will overheat, the braking efficiency will be reduced, braking distance will be prolonged, and brake pad and brake disc wear will increase. If the ABS fault indicator lamp lights up during driving, it means that there is a fault in the ABS system. At this time, drive at a low speed and go to the nearest BAIC Motor Dealership for inspection. If the vehicle has been parked for a long period, the brake discs may be corroded and the brake pad may be fouled.
It is recommended to clean the brake disc by driving at low speed and braking for several times before driving. Brake system fault indicator lamp If the brake system fault indicator lamp turns on during driving, it indicates that the brake system is faulty and the brake fluid level needs to be checked.If the braking fluid level is normal, it indicates that there are other faults in the brake system. In this case, provided that safety is ensured, pull over immediately and Brake wear indicator* 7. Brake system failure The brake pad is equipped with an audible wear indicator.
When the brake pedal is stepped on during driving, harsh screams or scraping sounds are heard (this is different from brake squeezing, If you notice a sudden increase in braking distance or increased brake pedal travel, there may be a problem with the brake system. Under the 116 When the vehicle completely loses its brakes, do not drive forcibly. At this time, you should pull over with safety, contact the BAIC Motor Dealership, and wait for rescue. It is forbidden to coast in neutral when driving on icy and snowy roads.