BAIC U5 PLUS series — 1 (74)

Safety instructions for working in the engine compartment 5. Make sure that the vehicle cannot roll away accidentally. General description The engine compartment is a dangerous area. Never work in the engine compartment if you are not familiar with the necessary operations and general safety protection measures, such as suitable tools! Please hand over all the work to the BAIC Motor Dealership. Injuries may be caused by improper operations. Maintenance and servicing Before carrying out any work in the engine compartment, the following should be carried out: 1. Park the vehicle on a flat and load- bearing ground in a safe area; 2.

Apply the parking brake, put the gear in "P" or neutral, turn off the engine, and wait for the engine to cool down; 3. Keep children away from the vehicle; 4. Open the engine compartment hood; 148 If working under the vehicle, take appropriate measures to prevent the vehicle from rolling, or support the vehicle with suitable supports. In this case, it is not advisable to support the vehicle with the on-board jack assembly, so as to avoid injury to the operators under the vehicle! Check the vehicle for oil leakage. Avoid fluid dripping onto the hot engine or exhaust unit, which could cause a fire.

Before opening the engine compartment, if steam or cooling liquid can be seen spilling out of the engine compartment, never open the engine compartment, beware of burns! The cover can only be opened when the engine is cooled and no steam or cooling liquid can be seen. Do not carry out operations such as checking and adding fluid in the engine compartment when the engine is overheated, so as to avoid injury and scald to operators, or even fire. If you have to work when the engine is starting or running, be careful not to injure the operator by rotating parts such as accessory belts, generators, cooling fans, and high-pressure ignition systems!

When adding fluid, do not mix the various fluid, otherwise it will cause serious functional failure of the vehicle. Do not touch the cooling fan, which is temperature-controlled and may be turned on automatically when the engine is stalled.