BAIC U5 PLUS series — 1 (75)(1)

Engine cooling liquid The cooling liquid can be used for corrosion protection, cavitation and leakage prevention. It also prevents the radiator from boiling and prevents the forming of the scale and freezing etc. It can maintain the best operation condition of the cooling system and ensure the normal operation temperature of the engines. open the cooling liquid reservoir filler cap and add the cooling liquid between the maximum scale mark and the minimum scale mark of the cooling liquid. Inspection of engine cooling liquid level If cooling liquid is missing a lot or often missing, please go to the BAIC Motor Dealership to check the vehicle cooling system.

Check the cooling liquid level after the engine has cooled down. Maintenance and servicing FULL: cooling liquid maximum scale mark. LOW: cooling liquid minimum scale mark. Check the cooling liquid level after the engine has cooled down. The cooling liquid level should be between the maximum scale mark and minimum scale mark. Engine cooling liquid temperature too high warning lamp MAX: cooling liquid maximum scale mark. If the temperature warning lamp of the engine cooling liquid is on during driving process, it indicates that the temperature of engine cooling liquid is too high.

If the liquid level is lower than the minimum scale mark, the specified type of cooling liquid should be added in time. MIN: cooling liquid minimum scale mark. The cooling liquid level should be between the maximum scale mark and minimum scale mark. Supplement of engine cooling liquid If the liquid level is lower than the minimum scale mark, the specified type of cooling liquid should be added in time. Check the cooling liquid level after the engine has cooled down. If a small amount of cooling liquid is found missing, 149 warning lamp is on, otherwise the engine will overheat and seriously damage the engine.

Do not open the cooling liquid reservoir filler cap before the engine is cooled down, because the cooling liquid temperature is very high at this time, and hot cooling liquid or steam may spray out when it is opened, causing scalding. It is forbidden to drive the vehicle without engine cooling liquid, otherwise it will cause vehicle failure. Do not continue to drive when the engine cooling liquid temperature overheating