Tires and wheels Visual inspection of wheel and tire too high. Regularly check the tread pattern depth and tread condition. If the tread pattern depth is too low, it will reduce the adhesion of the tire. Especially on wet and slippery roads, it can increase the risk of hydroslippage and seriously affect the driving safety. All wheels should be checked before driving, and the tires should be checked regularly for bulges, scratches, abnormal wear, cracks, iron nails, etc. If the above phenomenon occurs, please contact the BAIC Motor Dealership for inspection and replacement.
Maintenance and servicing Tire damage is not easy to be found, if the vehicle involves abnormal vibration, noise or deviation, there may be a tire fault, at this time you should stop immediately while ensuring wheel safety, and check the wheel and tire for damage. Contact the BAIC Motor Dealership for maintenance if necessary. The original tires are marked with abrasion on the bottom of the tread pattern, distributed around the circumference of the tire. If the tread is worn to the Wear marks, replace the tire. Common causes of tire damage: ● To strike or rub against a curb. ● Drive quickly through deep holes on the road.
● The tire pressure is too low or 161 After removing the wiper blades, be extra careful and place a thicker towel on the lower part of the wiper arm to prevent the wiper arm from springing back accidentally and damaging the windshield. Do not energize the entire vehicle until the wiper blade replacement is completed to avoid sudden work of the wiper after being energized, which may damage the windshield glass and the engine compartment. Keep a good view during driving! After removing the wiper blade assembly, be extremely careful with the wiper arm to avoid sudden rebound of the wiper arm and damage to the windshield. Regularly clean the wiper blade and all window glass.
Please try to avoid dry wiper blades to wipe the windshield glass to avoid aging and wear of the rubber strip, which will affect driving safety.