BAIC U5 PLUS series — 1 (81)

Check whether all wheels are equipped with valve caps and whether the valves are dirty and leaking. Do not install any components on the valve. Check the tire pressure Appropriate tire pressure can prolong the service life of the tire and improve the driving comfort, fuel economy and handling stability of the vehicle. Please refer to "tire information sign" for cold tire pressure standards. Tire pressure gauge checks tire pressure Tire information plate A tire pressure gauge can be used to check the tire pressure when the tire is cold. Check the condition of the rim. If the rim is distorted, cracked, corroded or seriously scratched, it shall be replaced in time.

If the wheel nut is often loosened, the wheel and wheel nut should be replaced. When the tire pressure is too low, it will exacerbate tire wear, greatly affect the handling stability and fuel economy of the vehicle, and increase the risk of tire failure. Excessive tire pressure will cause the vehicle to run unevenly and the tire to be worn unevenly, thus reducing the service life of the tire. Maintenance and servicing There is a data sign with tire information on the left B-pillar, which can be seen by opening the left front door. Inflation shall be carried out according to the tire pressure specified on the data sign. 1.

Unscrew the valve cap counterclockwise from the tire valve, and use soap solution to check whether there is air leakage in the valve; Check the tire pressure at least once a month. Check the tire pressure (including the spare wheel) after driving on rough roads or before long-distance driving. The spare wheel pressure shall be 4.2 bar. When checking the tire pressure, the tire must be in the cold state. Cold tire means that the vehicle has not been driven for at least three hours, or has been driven for no more than 1.6 km.

162 You cannot continue driving after the tire bulges, cracks, etc., because a tire burst may occur during driving, which may lead to traffic accidents and personal injury.