BAIC U5 PLUS series — 1 (35)

High beam warning Turn signal lamp When the steering is completed, the lever will automatically return with the steering wheel. At the same time, the external turn signal and the turn signal indicator lamp in the instrument cluster will go out. Operating system and equipment Pull the light control lever toward the steering wheel plane, the high beam lights will be on, and the light control lever will automatically bounce back after being released, and the high beam lights will be turned off to warn the vehicles and pedestrians ahead.

When pushing the light control lever down to the bottom, the external left turn signal and the left turn signal in the instrument cluster flash, accompanied by a ticking sound. When pushing the light control lever all the way up, the external right turn signal and the right turn signal in the instrument cluster flash, accompanied by a ticking sound. 70 In conditions such as wet, cold, vehicle exposed to the rain, car after washing, etc., tiny water droplets, water mist, white mist, or frost may appear on the inner surface of the lampshade:

● This situation comes due to the natural phenomenon where condensation happens as the water vapor in the high-temperature air inside the lamp gets cooled, and it does not affect the normal use of the vehicle. ● When the vehicle is parked in a dry environment, the engine is turned off, and the lamps are turned on, the water vapor will gradually evaporate, and the fog on the inner surface of the lampshade will dissipate along with it, and there may be residues in non-functional areas such as the corners of the lamps. ● This phenomenon will not affect the service life and lighting effect of the vehicle lighting device, and you do not need to replace the car light assembly.

When the steering or lane change is completed, please confirm that the light control lever has returned, otherwise it should be returned manually.