Light control Position lamp Headlamp Headlamp is lighted up automatically * Operating system and equipment When the start/stop button is in the "RUN" mode, turn the light control knob so that the mark Turn the light control knob ① so that when the mark on the light control knob is aligned with the position, the front and rear position lamps, the rear license plate lamps, the key backlight and the position lamp indicator lamp on the instrument cluster light up, and turn back to the OFF position to turn off.
on the light control knob ① is aligned with the position When the keyless start/stop button is in the "RUN" mode, turn the light control knob ① so that the mark on the light control knob is aligned with the position . When the outside light is dark (such as at night or driving through the tunnel, etc.), headlamp automatically will turn on, and turn it back to the OFF position to turn it off. , the headlamp will be on, and turn it back to the OFF position to turn it off.
69 When the low beam is on, push the light control lever outward perpendicular to the plane of the steering wheel to turn on the high beam, and pull the light control lever toward the plane of the steering wheel again to turn off the high beam.