BAIC U5 PLUS series — 1 (36)

Use the following road conditions as a reference, by turning the headlamp height adjustment switch (position "0"), for driver or driver and front passengers (without luggage). Follow me home Hazard warning lamp switch The "Follow Me Home" headlamp turns on Operating system and equipment Position "1" applies when all seats are full. Position "2", suitable for all occupied seats and evenly distributed load in the trunk (up to the permissible axle load on the rear axle and within the maximum permissible load mass). Follow-me-home function provides users with delayed lighting services. With intelligent OBU, you can choose the time to turn on/off, or delay the follow-me-home function.

The hazard warning lamp switch is located on the air conditioning control panel. Position "3", suitable for the driver and evenly distributed load in the trunk (up to the permissible axle load on the rear axle and within the maximum permissible load mass). In case of emergency, use hazard warning lamp to remind other road users to avoid traffic accidents. After turning the start/stop button from the "RUN" position or "ACC" position to the "OFF" position, within 1 minute, lift the light control lever toward the steering wheel plane to start the follow follow-me-home function, and low beam will It will light up for a while and then go out.

72 Opening and closing of follow-me-home function, and lighting time can be set in intelligent OBU.