Periodic maintenance and adjustment ESU11740 Tool kit The owner’s tool kit has the tools which are sufficient for most periodic maintenance and minor repairs. A torque wrench is also neces- sary to properly tighten nuts and bolts. 1. Fastener 1. Tool kit ECS00360 NOTICE Before starting the engine, make sure that the tool kit is properly seated in its holder and is securely fastened. 1. Shroud To install the shroud Hook the end of the shroud onto the shroud stay, slowly lower it to the original position, and then tighten the fasteners.
TIP If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. ESU12892 Removing and installing the shroud and covers EWS00091 Be sure shroud and covers are secured before operation. A loose shroud or cover could move and cause loss of control. WARNING 1. Shroud stay Shroud To remove the shroud Loosen the fasteners, slowly raise the shroud, and then unhook the shroud from the shroud stay. Left and right side covers To remove a side cover 1. Remove the shroud. (See the above pro- cedure.) 41