Periodic maintenance and adjustment 1. Locknut 2. Chain tension adjusting bolt 1. Brake pad wear indicator 2. Brake pad wear limit 5. Install the right side cover and the shroud. Brake pad wear limit: 4.7 mm (0.19 in) ESU12132 Brake and parking brake EWS00440 measuring the thickness of the pads. If the parking brake pads reach the wear limit, ask a Yamaha dealer to replace them. G A soft, spongy feeling in the brake lever indicates a failure in the brake system. G Do not operate the snowmobile if you find any problems in the brake system. when the snowmobile is placed on its side for service. 1.
Parking brake pad wear limit Test the brake at a low speed when starting out to make sure that it is working properly. If the brake does not provide proper braking performance, inspect the brake for wear or brake fluid leakage. (See the following section for more details.) Checking the brake pads Check the brake pads for wear. If the brake pads reach the wear limit, ask a Yamaha dealer to replace them. Parking brake pad wear limit: 1.2 mm (0.047 in) To adjust the parking brake As the parking brake pads wear, adjustment may be necessary to ensure proper brake performance. 1. Loosen the parking brake pad locknut and the parking brake pad adjusting bolt. 2.
Loosen the parking brake cable locknut. 58 WARNING Checking the parking brake pads You could lose braking ability, which could lead to an accident. Ask a Yamaha dealer to inspect and repair the brake system. S00060 NOTICE ake sure that the brake lever end does ot project out over the handlebar end. his will help prevent brake lever damage