Yamaha Motor Corporation RX10GTY/RX10LTGTY — Periodic maintenance and adjustment

Periodic maintenance and adjustment 1. Drive track deflection 1. Slide runner Standard drive track deflection: RX10GT 30.0–35.0 mm (1.18–1.38 in) RX10LTGT 25.0–30.0 mm (0.98–1.18 in) 3. If the deflection is incorrect, adjust the drive track. Adjusting the drive track 1. Lift the rear of the snowmobile onto a suit- able stand to raise the drive track off the ground. 2. Loosen the rear axle nut. 1. Left adjusting nut 2. Right adjusting nut 1. Rear axle nut 3. Start the engine and rotate the drive track one or two turns. Stop the engine. 4. Check the drive track alignment with the slide runners. If the alignment is incorrect, align the drive track by turning the left and right adjusting nuts.

62 Drive track alignment Shifted to right Shifted to left Left adjusting nut Turn out Turn in Right adjust- ing nut Turn in Turn out