Periodic maintenance and adjustment Shifted to right 6. Recheck alignment and deflection. If nec- essary, repeat steps 3 to 5 until the prop- er adjustment is achieved. 7. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lbf) Slide runners Check the slide runners for wear and dam- age. If the slide runners reach the wear limit, they should be replaced. 1. Forward 2. Gap 3. Slide runner 4. Drive track 5. Slide metal Shifted to left 1. Slide runner 2. Wear limit height 1. Forward 2. Gap 3. Slide runner 4. Drive track 5. Slide metal Slide runner wear limit height: 10.5 mm (0.41 in) ECS00350 Ride on fresh snow frequently.
Operating on ice or hard-packed snow will rapidly wear the slide runners. NOTICE 5. Adjust the drive track deflection to speci- fication. NOTICE: The right and left ad- justing nuts should be turned an equal amount. [ECS00592] ESU12193 Lubrication Lubricate the following points with the speci- fied grease. 63 Drive track deflection More than specified Less than specified Left adjusting nut Turn in Turn out Right adjust- ing nut Turn in Turn out