Yamaha Motor Corporation RX10GTY/RX10LTGTY — Troubleshooting

Troubleshooting Use the connecting leads to jump-start the snowmobile only. Do not use the connect- ing leads for any other purpose. 4. Pull the red (+) connecting lead cover to expose the terminal through the slit in the cover, and then connect the red (+) jump- er cable to the red (+) connecting lead. To start the engine using the booster battery 1. Apply the parking brake and turn the main switch to the off position. 2. Remove the shroud and the right side cover. (See page 41 for removal proce- dures.) 3. Remove the red (+) connecting lead from the lead holder and move it away from the black (–) connecting lead. NOTICE:

Be sure to connect the red (+) jumper cable to the red (+) connecting lead and the black (–) jumper cable to the black (–) connecting lead. Do not re- verse the connections. [ECS00661] 5. Connect the other end of the red (+) jumper cable to the positive (+) terminal of the booster battery. 6. Connect the black (–) jumper cable to the negative (–) terminal of the booster bat- tery. 71 G Be sure to pull the lead covers back over the terminals completely. If the termi- nals are exposed, they could come into contact with the frame or a metal part of the snowmobile and this can cause elec- trical system damage or A FIRE HAZ- ARD. ECS00650 NOTICE