Yamaha Motor Corporation RX10GTY/RX10LTGTY — Storage

Storage Surface protection Apply a coat of wax to painted surfaces. Apply suitable protectants to the exterior of the en- gine, drive track, and to other metal, plastic, and rubber parts. Battery Remove the battery from the snowmobile. Store it in a cool, dry place that is above 0 °C (32 °F), but less than 30 °C (90 °F). Check the condition of the battery once a month, and charge it as necessary. NOTICE: Always keep the battery charged. Storing a dis- charged battery can cause permanent bat- tery damage. [ECS00691] Drive track Loosen the drive track and block up the chas- sis so that the track is suspended above the ground. V-belt Remove the V-belt and store separately.

Storage Store the snowmobile in a dry, well-ventilated place out of direct sunlight. Put a fabric cover over the snowmobile, preferably one that is designed for it. Do not use a plastic or vinyl cover—condensation could be trapped un- derneath which could increase the chances of rusting. Returning to service after storage When returning your snowmobile to service, install the V-belt and battery and adjust the drive track. Remove the spark plugs and clean or replace them if necessary. Perform all other pre-oper- ation and seasonal maintenance checks list- ed in the periodic maintenance chart.

For peak performance, it is recommended that you have your snowmobile checked and tuned by a Yamaha dealer. The dealer has the experience and training to help you get the maximum performance and use out of your Yamaha snowmobile. TIP Before installing the battery, have a Yamaha dealer inspect and fully charge it. 75