John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL CARBURETOR

Group 05 Fuel and Air Systems CTM5 (20OCT92) 21-05-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=106 SERVICE PARTS KITS The following kits are available through your parts catalog: Carburetor Gasket Kit Main Jet High Altitude Kit Complete Carburetor MX,3005A1,A1 -19-21OCT92 REMOVE AND INSTALL CARBURETOR 1. Remove air cleaner assembly. 2. Remove cap screws and washers (B) and duct and gasket (A). -UN-11MAR91 3. Separate carburetor from heat shield (C). Remove carburetor. 4. Disconnect choke linkage (E) and throttle linkage (D). M80306 5. Remove heat shield (C) and gaskets. 6. Make repairs as necessary. (See procedure in this group.) 7. Install gaskets and heat shield.

-UN-11MAR91 8. Connect linkage. 9. Install carburetor, gaskets and duct. Tighten cap screws. M80307 10. Install air cleaner assembly. A—Duct and Gasket B—Cap Screws and Washers C—Heat Shield D—Throttle Linkage E—Choke Linkage MX,2105A1,A1 -19-21OCT92 05 1