Group 15 Cylinder Head CTM5 (20OCT92) 21-15-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=114 OTHER MATERIAL Number Name Use SCOTCH-BRITE® Abrasive Clean cylinder head Sheets/Pads SCOTCH-BRITE is a trade mark of the 3M Company. MX,5015A1,A1 -19-21OCT92 REMOVE AND INSTALL CYLINDER HEAD 1. Remove blower housing. (See Group 10.) 2. Remove cylinder head cover. -UN-31AUG88 3. Remove spark plug. 4. Remove cylinder head and gasket. 5. Make repairs as necessary. (See procedures in this M51537 group.) IMPORTANT: Gasket surfaces are coated with sealant. Do not damage surfaces or gasket during installation. 6. Install cylinder head with new gasket. 7.
Install cylinder head cover and cap screws. Tighten finger tight. 8. Tighten cap screws in sequence shown. Tighten to initial torque specifications. 9. Continue in sequence, 4 N·m (35 lb-in.) at a time, until final torque is as specified. 10. Install spark plug and tighten to specification. 11. Install blower housing. TORQUE SPECIFICATIONS Cylinder Head Cap Screws Initial Torque . . . . . . . . . . . . . . . . . . . . . . . . . 10 N·m (89 lb-in.) Final Torque . . . . . . . . . . . . . . . . . . . . . . . . . 21 N·m (186 lb-in.) Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 N·m (212 lb-in.) MX,2115A1,A1 -19-21OCT92 15 1