Cylinder Head/Cylinder Head INSPECT CYLINDER HEAD 1. Remove carbon deposits from combustion chamber and gasket surface using SCOTCH-BRITE abrasive pads or an equivalent. 2. Clean head with solvent. M80292 -UN-11MAR91 3. Inspect for cracks or broken cooling fins. 4. Inspect gasket surface for burrs and nicks. 21 15 2 5. Inspect head gasket for burns and traces of gas leakage. Replace if necessary. 6. Put cylinder head on a surface plate. Check for distortion at several points around the head using a feeler gauge. Replace head if distortion is more than specifications. SPECIFICATIONS Cylinder Head Distortion (Max) . . . . . . . . . . . . .
0.40 mm (0.015 in.) MX,2115A1,A2 -19-21OCT92 CTM5 (20OCT92) 21-15-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=115