John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL CAMSHAFT

Cylinder Block, Valves and Internal Components/Camshaft REMOVE AND INSTALL CAMSHAFT 1. Remove crankcase cover. (See this group.) IMPORTANT: Align timing marks to prevent damage to tappets when removing camshaft. M80318 -UN-11MAR91 2. Remove washer (A). 3. Rotate crankshaft until timing marks (B) align. 4. Remove camshaft (C). 5. Inspect camshaft. (See this group.) 6. Apply clean engine oil to camshaft lobes and journals. 7. Align timing marks and install camshaft. NOTE: Install washer with beveled ID, toward crankshaft. 8. Install washer. 9. Install crankcase cover.

CTM5 (20OCT92) 21-20-5 K Series Air Cooled Engine MX,2120A1,A7 -19-21OCT92 AllTractorManuals.com 220596 PN=120 REMOVE AND INSTALL CRANKCASE COVER NOTE: Approximate crankcase oil capacity is 0.6 L (1.27 pt). -UN-19MAR91 1. Drain crankcase. 2. Remove crankcase cover and gasket. 3. Clean crankcase and crankcase cover gasket M80294 surfaces. NOTE: Do not force cover. Gears must mesh for proper positioning. 4. Install gasket and cover. Tighten cap screws using the sequence shown. TORQUE SPECIFICATIONS Mounting Cap Screws . . . . . . . . . . . . . . . . . . . . 21 N·m (186 lb-in.) Oil Drain Plug . . . . . . . . . . . . . . . . . . . . . . . . . .

14 N·m (121 lb-in.) MX,2120A1,A6 -19-21OCT92 21 20 5