John Deere K Series Air-Cooled Engines — CHECK VALVE-TO-TAPPET CLEARANCE

Cylinder Block, Valves and Internal Components/Check Valve-To-Tappet Clearance CHECK VALVE-TO-TAPPET CLEARANCE NOTE: Valve grinding changes the valve-to-tappet clearance. Check clearance when engine is cold. 1. Install valves in cylinder block. M80248 -UN-11MAR91 2. Turn crankshaft until intake valve (A) is at its highest position. Check clearance between valve (B) and tappet (C), with feeler gauge (D) and compare to specifications. 3. Grind end of valve stem to obtain proper clearance. VALVE CLEARANCE SPECIFICATIONS A—Intake Valve Exhaust Valve . . . . . . . . . . . . . . 0.12—0.34 mm (0.005—0.013 in.) B—Exhaust Valve Intake Valve . . . . . . . . . . . . . . . .

0.12—0.18 mm (0.005—0.007 in.) C—Tappet D—Feeler Gauge MX,2120A1,A5 -19-21OCT92 CTM5 (20OCT92) 21-20-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=119 5. Center valve seat on the valve face: —(A) shows correct position. —(B) shows incorrect. 6. Check seat for good contact using Prussian Blue Compound. -UN-07SEP88 M18615 MX,3015A1,A9 -19-21OCT92 21 20 4